+38 (044) 351-16-52

UHF RFID 8-Port Module HZ580

HZ580 is UHF RFID reader module board for developing 8-port fixed RFID reader. Based on Impinj R2000 chip platform, with 8 channels of SMA interfaces for RFID antennas,  it support multiple-tag and long range reading.

 Features HZ580

  • UHF RFID Transceiver
  • Frequency range: 840MHz – 960MHz
  • Power consumption :1200mA @ +30dBm
  • +5V single supply operation
  • ISO 18000-6C/C1G2, ISO 18000-6Bsupport
  • Decoding: FM0, Miller 2/4/8
  • Data rate: 40k ,160k,320k, 400k
  • Fully interoperable in different global regulatory environments such as US, EU, GB
Table 1: Socket interfaces
PIN Definition Description
1 GND both connect to Ground
2 GND
3 3.7V-6V DC Both connect to Power
4 3.7V-6V DC
5 GPIO3 Output (3.3V)
6 GPIO4 Output (3.3V)
7 GPIO1 Input (3.3V)
8 NC NC
9 UART_RXD TTLElectriclevel
10 UART_TXD
11 USB_DM Test only
12 USB_DP
13 GPIO2 Input (3.3V)
14 EN High Level Enable
15 NC NC

Table 2: Electrical Specifications

Voltage +4.5V~+6V
Current 20mA
Workingtemperature ﹣20℃~﹢70℃
Storage temperature ﹣40℃~﹢85℃
Working humidity ＜95%（﹢25℃）
Protocol ISO 18000-6C/C1G2,ISO 18000-6B
Working Frequency 840MHz~960MHz
Area Supported US, Canada and other regions following U.S. FCC

Europe and other regions following ETSI EN 302 208 with & without LBT regulations

Mainland China

Japan

Korea

Malaysia

Taiwan
Output Power 0~33dBm
Output power accuracy ±1dB
Receiving sensitivity ＜-80dBm
Tag RSSI Supported
Antenna connection protection Supported
Communication Interface TTL UART Interface
GPIO 2 inputs, 2 outputs (3.3 Electric Level)
Maxcommunication baud rate 460800bps
Cooling method External heat sink air-cooled